We represent Messer Cutting Systems – Messer Oxy-Fuel products.
Redefining Welding Excellence Across India
Messer cutting systems – The whole world of Oxyfuel technology.
Messer Cutting Systems – Messer GmbH is a pioneer of oxyfuel cutting and welding torches, offering high competency in the products, applications & technology globally. The products & solutions cater to a wide range of gas welding, cutting & regulation.
The Adolf Messer GmbH, founded in 1898, developed the first Oxyfuel torches for welding and cutting. The company became worldwide known as messer Cutting Systems and gas and welding technology manufacturer Messer GmbH. In 1999 the welding and cutting technology activites were merged in the Messer Cutting & Welding GmbH, and have been integrated into the MBCHolding GmbH in 2000.
PROFI Cut H (EN ISO 5172)
The New Generation Nozzle Mixing Technology
(Same Torch can be used for Acetylene/LPG/*BMCG)
Absolute Safety > High resistance to backfires
Balanced Weight > Comfortable working for continuous operation
> Torch weight 1050 gms., length 510mm
Accurate > Precise flow rates
> Heavy-duty applications even at low cylinder pressures
> Cutting range : 3 – 300mm
Tough > 90° Solid Forged Brass Head
Durable > Rugged design ensures maximum strength
Excellent cutting quality > Reduced Post Cut Grinding Operation
*Note: Proficut cutting torch also available in following lengths (800mm, 1000mm, 1200mm & 1500mm)
Gas Economizer (Save Gas – Increases Productivity)
For Saving Oxygen, Fuel Gas, Time and Torch Wear
It discontinues automatically the supply of oxygen and fuel gas to the torch when the torch is placed on the hook during the intervals between operations. The flame does not require re-setting on resuming operations. When the torch is unhooked, the full gas flow supply is released and the previous mixing ratio is maintained. Absolutely necessary whenever work involves frequent temporary stoppages; as in production brazing. Greatly improves brazing efficiency & productivity and economy in gas consumption.
> Designed in accordance to the most current internationally recognized standards EN ISO, BSP, CGA and NFS.
> Manufactured under the quality management system of EN ISO 9001.
> 100% tested before dispatch.
> Principally designed for general workshop welding, heating and brazing upto 3.5 bar / 51 psi oxygen pressure.
> Simple to fit to any work bench or wall bracket with angle mounting bracket supplied.
Pilot Flame > Easy restart of torch without resetting of flame
Easy Installation > Can be fitted on any work bench or wall bracket
High heating performance with Fuel Gas Only (LPG-BMCG)
The New High-Performance Brazing and Heating torch AIRTHERM *FSH-P* continues the tradition of Messer gas brazing and heating equipment with quality and reliability, which is synonymous with Messer.
The torch series AIRTHERM *FSH-P* for fuel gas propane/atmospheric air with power and highly stable flame even in most adverse conditions is a proven design incorporating the latest technical features necessary to meet the ever-changing applications and requirements for gas brazing and heating.
The Brazing and Heating Torch AIRTHERM *FSH-P* is the low-cost, high-quality, valve alternative.
Gas cylinders are used for many applications in factories, workshops, laboratories, hospitals, universities, etc. The gases used have many different physical and chemical properties and they may cause dangerous situations if not handled properly. The best solution is to locate a gas cylinder outside the working area and distribute the gas by pipeline to the point of use. Apart from safety, this approach offers quite a few advantages over using single cylinders at the point of use as below :
Safety > Leaking gas cylinders may create dangerous situations
> Cylinders may drop and damages or cause injuries, as compressed gas cylinders can fly like rockets in case if they are damaged in the valve area.
Reliability > Uninterrupted gas supply by pressure monitoring and/or automatic change-over of the manifold systems.
> Stable working pressure of the gases on a continuous basis.
Gas purity > The purity of the gas is maintained by using specially designed and cleaned – equipment with integrated purge valves
Cost savings > Gas cylinders at a central location are easier to handle
> You can have a lesser no of gas cylinders working and save on cylinder rentals
> Cylinder control panels ensure more efficient use of the gas cylinders
> Due to better control of the gas purity, all related equipment has a much longer lifetime.
Other advantages
> Manifolding reduces clutter and increases working space on the shop floor.
> Less damage to pressure regulators, hoses, and other fittings
> Easier control of leak tightness
A Central Distribution System for gases must fulfill the following requirements :
> Uninterrupted supply of gas
> Maintain the integrity and purity of the gas up to the point of use
> Safe distribution of the gas